Article by Vishnu Batwara
Gemstones are used in a number of jewelry items. They are very popular especially in case of the rings. One of the most popular types of gemstones is the diamonds.
However, one can use any other gemstones to make the rings. Custom made gemstone rings are very popular these days. They are easy to make and are very good in
quality.
The fact is that you can easily make your gemstone rings at much cheaper price than you can buy the ready made gemstone rings. The best way is to simply purchase
the gemstones and craft your very own gemstone rings.
You will need some things to make the gemstone engagement rings yourself that include, ring settings, a pair
of needle nose pliers and a set of gemstone tweezers.
*First of all you will have to buy the ring settings with the right number of prongs. The number of prongs depends on the type of gemstone you choose. Also, the
type of ring mount you choose is totally dependent upon the gemstone’s shape. In case the gemstone has an emerald, Asscher or princess cut, you should use a four-prong
setting. You should go for a six-prong setting if your gemstones have a marquisse, round or oval cut.
*You have to determine the size of your gemstones. For that you have to measure them. Whatever the size of the gemstones is, the similar size of ring setting you
should buy. This is very important because if you do not have a right sized ring setting, chances are your gemstones will not be able to hold themselves securely in
the ring setting.
*After doing the above mentioned things you should place the gemstone into the prongs’ center by simply using a pair of tweezers. In most of the cases, the
gemstones appear to fit well in the settings. However, the gemstones are not yet secured.
*You then have to take the pair of needle nose pliers and use it to crimp a single prong at a time over the gemstones. You simply have to position the pliers’
bottom tong at the ring setting’s bottom directly below the prong you are trying to tighten. The other tong has to be placed onto the prong’s top. You then have to
carefully apply the pressure to the prong and bend it onto the gemstone.
*You have to keep on tightening every prong keeping your movement diagonal. The process has to be continued till the time every single prong is tightened. It is
important to move diagonally to make sure that the gemstones do not fall out of the ring setting.
About the Author
The author is an expert on gemstone rings. Here he offers information on making custom gemstone rings, engagement rings, wedding rings and other jewelry products. For more information log on to http://www.gemsny.com
Mens gemstone rings available at Adamas Inc. www.coldiamond.com Minnesota jewelers. in Minneapolis, MN We feature meaningful Christian jewelry and custom made designer rings like this unique blue sapphire mens gemstone ring: “Divine Presence”.
I’m not an expert when it comes to this. Didn’t even know this was possible. Useful read, appreciate your posting this.
Welcome to my site : Back pain relief
Like or Dislike:
1 
0